Тахометр электронный под DIN рейку ТЭ-6К-ТК-2-24В-Д
  • Continuous measurement and indication of rotor or shaft rotational frequency of any mechanism.
  • Complies with requirements of GOST 21339 and technical conditions TU U 33.2‑32436145-001:2007.
  • Listed in the State Register of Measurement Instruments of Ukraine.
  • Universal measuring input. Compatible sensors:
    • contactless inductive switches with pulsed type signal from 8 to 30 VDC at 750 ohm load. Pulse width not less than 100 μs. Inductive sensors from TURCK can be used as a sensor;
    • magnetic inductive sensors with differential-mode output signal from 0.2 to 200 V at 4.4 kOhm load.
  • Programmable DC-current output 0..5, 0..20 or 4..20 mA.
  • RS-485 interface, protocol Modbus (RTU).
  • 4 NO relay outputs for signaling.
  • Indication can be duplicated on remote display unit BVI-TK-1.
  • Can be completed with portable calibrator MIG-1-TK.
  • Can be setted up via RS-485 interface, protocol Modbus (RTU) using PN-01-TK or special software.
  • Five-digit green LED display with 9 mm symbol height.
  • Installation on DIN rail, 35 mm (vertical).


Technical specifications

Number of marks


Accuracy class


Supply voltage


DC-current output error, mA


Operating temperature range:

  • tachometer
  • sensor


Protection type (IP code):

  • tachometer
  • sensor


Size (WxHxL), mm


Scope of supply:

  • rotational speed sensor (option);
  • secondary transducer — digital measuring device TE-6K-TK-2-24VZD:

Z – model type:

«U» – no relay outputs, no DC-current output;

no marking – single RS-485, 4 relay outputs, DC-current output;

  • AC/DC converter 220VAC/24VDC;
  • remote display unit BVI-TK-1 (option).


Ordering designation

Electronic tachometer TE-6K-TK-2-24VZD.
Electronic tachometer model name fully complies with measuring device name.

Example. Electronic tachometer TE-6K-TK2-24V-D – DIN rail electronic tachometer with universal sensor input, 24VDC supply voltage, single RS-485 interface, 4 relay outputs and DC-current output.