Temperature indicator I-6-TK

Measurement and conversion of electrical signals generated by thermocouples and RTDs.
Three-wire or four-wire RTD connection.
Cold junction temperature compensation (internal sensor).
The configurable analog input.
Continuous sensor fault detection.
Interface RS-485, protocol Modbus (RTU) upon request.
Four-digit green LED display with 14 mm symbol height.
20-segment bar graph indicator.

Thermocouples	K, L, S, B
RTDs: platinum (W₁₀₀=1.3850 и W₁₀₀=1.3910) copper (W₁₀₀=1.4260 и W₁₀₀=1.4280)	Pt50, Pt100, Pt500 Cu50, Cu100
Temperature measurement error (for thermocouples), °С: L, K in the range of -150..0°С L, K in the range of 0..800 (1300)°С S, B	±(0.25·10^-2×\|t\|+2.5) ±(0.1·10^-2×\|t\|+2.5) ±7.0
Temperature measurement error (for RTDs), °С	±(0.2·10^-2·(t+273)+0.1)
Supply voltage (depends on model)	12VDC, 24VDC, 48VDC
Least significant digit value	0.01; 0.1; 1
Operating temperature range	+5°С..+50°С
Protection type (IP code)	IP40
Size (W×H×D), mm	72×55×84

Temperature indicator I-6-TK-XXV:

XX – nominal supply voltage taken from a variety 12VDC, 24VDC, 48VDC.

Device is equipped with a remote console for device setting up.

Example. Temperature indicator I-6-TK-24V – temperature indicator, 24VDC supply voltage.